Application
Cookware pan pot bottom induction brazing machine is mainly used for cookware composite bottom welding of stainless steel /copper /aluminium pan, pot, kettle, and can also be used for plane heating of other work piece. Cookware Pan and pot bottom brazing machine is a mechanical, hydraulic and electrical integrated equipment, controlled by several sets microcomputer.
The main performance indicators take the leading status at home and aboard.
Advantages
◎The higher the frequency, the higher the technical requirements, and the more uniform the product heating.
◎Good welding quality: the comparison shows that the temperature of the work piece welded by solid-state high-frequency is uniform and the surface is smooth.
◎Energy saving: the test shows that this equipment saves more than 30% of electricity than the electronic tube equipment of the same specification.
◎Water saving: due to its small loss, it does not need too much cooling water, so the water consumption is more than 50% less than that of electronic tube equipment of the same specification.
◎Light weight: Due to the small size of the main power device (Mosfet), there are no devices such as filament regulators, matching coils, and gate circuits.
◎Easy to operate: start and use immediately, and stop when you say stop. There is no need for tube-type preheating or cooling after shutdown.
◎Safe and reliable use: The technology is mature and stable, and the operation is reliable. Since the working voltage is lower than that of the electronic tube,it is not easy to cause casualties.
Main Technical Parameter
Model | JSB-21-100/400 |
Function | Composite metal pot bottom pressure induction heating welding |
Technology | Heating by traditional vacuum tube,controleed by several sets microcomputer |
Component part | Operation tabel,Power system,water cooling system |
Iduction head | 2 stations,3 truntables |
Working Diameter | 100-380mm |
Working max temperature | 600-700℃ |
Working height | 370mm |
Heating Mode | Manual/Automatic |
Air Pressure | 0.5-0.8MPa |
Working Speed | 2000-6000pcs(depending on the thickness,diameter and temperature of the work piece |
Power | 100kw |
Voltage | 200-300KHz,0-450V |
Induction head | 2pcs |
Dimension | Power System | 2650*1600*2000mm |
Operation Table | 2650*800*2000mm |
Cooling System | 1000*1000*1000mm |